Ford Explorer Radio/Stereo Installation Instructions

The 1990 Ford Explorer popularized the SUV as an alternative to the station wagon. Altering out the stereo on the Explorer is likely one of the easier projects for the do-it-yourselfer. With the best tools, it takes less than an hour. Ford Explorers used a pin software to loosen the radio from the sprint however you may make your individual with a coat hanger.

Ford Explorer Radio/Stereo Installation Procedures

Ford Explorer Radio Installation

1. Open the hood and take away the destructive battery cable. Ensure it is resting away from any steel parts.

2. Minimize two eight-inch pieces of coat hanger and bend them right into a U-shape. Alter the hangers until they match easily into the two front mounting holes on all sides of the stereo. Press the hangers into the holes. Squeeze each of the “U” pieces collectively and pull. The radio will pull out of the dash. Later model Explorers should remove the trim ring to show the mounting pinholes.

3. Pull the stereo head unit out of the dash and remove the wires. Different Ford methods will swap out and plug straight into the original wiring.

4. Join the brand new head unit wiring harness adapter to the old wiring for an aftermarket installation. Snap the wire harness into the back of the brand new head unit and reattach the battery damaging cable.

5. Flip the new Explorer radio on and confirm every of the speakers is working and radio control is possible. Slide the brand new head unit into the sprint till you hear the mounting pins click on into place.