Ford Escape Car Stereo/Radio Installation Instructions

The Ford Escape adequately serves as The Ford Motor Company’s small or crossover SUV. While smaller in size and capability, the Escape comes with many of the identical choices because the bigger fashions throughout the company. The stereo system, for one, is capable of meeting the demands of many car stereo enthusiasts. Within the case that an Escape proprietor feels the necessity to upgrade his radio or replace a defective unit, he can simply carry out the swap themselves.

Ford Escape Car Stereo/Radio Installation Instructions

Ford Escape Car Radio Installation

1. Unscrew the bolt for the negative battery clamp with the screwdriver. Take away the cable and clamp from the damaging lead post on the vehicle’s battery.

2. Place the removal tools into the slots found on the edges of the Ford stereo’s face. Pull the unit from the stereo mounting dock.

3. Remove the wiring to the rear of the stereo by hand. The wiring for the audio system might be grouped by plastic binders. Pull the antenna cable from the radio.

4. Insert the installation package bracket into the dash. Run the wiring through to the front of the opening and connect it to a wiring harness adapter. Attach the wiring harness adapter results in the brand new stereo. Plug the antenna wire into the aftermarket stereo.

5. Put the brand new stereo into the faceplate adapter package till it snaps into place.

6. Replace the battery cable clamp onto the destructive lead publish and tighten it with the screwdriver.